| 配电箱（柜）的门与门，门与壳体之间的缝隙必须一致 |
| 添加时间：2019/7/15 14:44:08 浏览次数： |
| 配电箱（柜）的门与门，门与壳体之间的缝隙必须一致，缝隙小于1mm，缝长大于1米时，均匀差不大于1.5mm。每台配电箱（柜）的铭牌必须采用金属制铭牌，铭牌中至少有产品名称、型号、厂家名称、主要技术参数，出厂编号、生产日期等六项。 The gap between door and door, door and shell of distribution box (cabinet) must be the same. The gap is less than 1 mm, and when the gap is longer than 1 meter, the uniform difference is less than 1.5 mm. The nameplate of each distribution box (cabinet) must be made of metal. There are at least six items in the nameplate, such as product name, model, manufacturer name, main technical parameters, factory number and production date. 铭牌应固定在前面板显见处，具体位置应美观合理，固定要求牢固。箱、柜必须附有主电路图、系统图、原理图、二次控制图，电路图中各参数要求与实物一致，并要过塑处理，用2mm厚阻燃性透明板嵌与箱、柜门后。 The nameplate should be fixed at the visible place of the front panel, the specific position should be beautiful and reasonable, and the fixing requirement should be firm. Box and cabinet must be accompanied by main circuit diagram, system diagram, schematic diagram and secondary control chart. The parameters in the circuit diagram are in accordance with the actual requirements, and should be superplastic treated. 2 mm thick flame retardant transparent plate is embedded behind the box and cabinet door. |
| 上一页 配电箱是数据上的海量参数 |
| 下一页 家庭配电箱安装要点 |
Copyright © 技术支持：遨游网络