| 家庭配电箱安装要点 |
| 添加时间：2019/7/1 14:10:02 浏览次数： |
| 家庭配电箱安装要点是： The main points of installation of household distribution boxes are as follows: 1、家庭配电箱应安装在干燥、通风部位，且无防碍物，方便使用。 1. Family distribution boxes should be installed in dry and ventilated parts, without obstructions, and easy to use. 2、家庭配电箱配电箱不宜安装过高，一般安装标高为1.8米，以便操作 2. Distribution boxes of household distribution boxes should not be installed too high. Generally, the installation elevation is 1.8 meters for easy operation. 3、进配电箱的电管必须用锁紧螺帽固定。 3. The pipes entering and distributing boxes must be fixed with locking nuts. 4、若家庭配电箱配电箱需开孔，孔的边缘须平滑、光洁。 4. If the distribution box of the home distribution box needs to be opened, the edge of the hole should be smooth and smooth. 5、配电箱埋入墙体时应垂直、水平，边缘留5—6毫米的缝隙。 5. When the distribution box is embedded in the wall, it should be vertical and horizontal, leaving 5-6 mm gap in the edge. 6、配电箱内的接线应规则、整齐，端子螺丝必须紧固。 6. The wiring in the distribution box should be regular and tidy, and the terminal screw must be tightened. 7、各回路进线必须有足够长度，不得有接头。 7. The feeder of each circuit must be of sufficient length and must not have joints. 8、安装后标明各回路使用名称。 8. Mark the use name of each circuit after installation. 9、家庭配电箱安装完成后须清理配电箱内的残留物。 9. After the installation of the home distribution box, the residues in the distribution box should be cleaned up. |
| 上一页 配电箱（柜）的门与门，门与壳体之间的缝隙必须一致 |
| 下一页 配电箱仅仅是低压回路的一个扩展 |
Copyright © 技术支持：遨游网络