| 配电柜内部装置的安装和检查 |
| 添加时间：2017/6/8 14:59:27 浏览次数： |
| 配电柜内部装置的安装和检查 Installation and inspection of internal installations of power distribution cabinets 柜体安装完成后清除柜内杂物，擦拭干净之后进行柜内装置的安装。首先安装母排，安装过程严格遵守相关技术规程，要求安装牢固、排列整齐，不与柜体或其他元件太接近等；其次敷设柜与变压器、柜与柜之间的控制电缆连接线；然后检查柜内的元器件的安装情况，应保证二次回路与图纸相符合，元器件质量良好，型号规格符合要求，更换某一元件时不影响其他部件和导线的固定，最后检查柜内是否遗留杂物，清扫干净。关于柜内检查有针对性的技术指导，这里不进行详述。 After the cabinet is installed, remove the clutter from the cabinet and clean it up and then install it in the cabinet. The installation procedure strictly follows the relevant technical procedures, and requires the installation to be strong and orderly, not too close to the cabinet or other components. Second, the cable connection between the cabinet and the transformer, the cabinet and the cabinet. Then check that the components contained in the installation, should guarantee the secondary loop consistent with drawings, components quality is good, the specifications conform to the requirements, the replacement of one element does not affect other parts and wire fixed, final inspection is contained in the legacy of sundry, clean. There are specific technical instructions for inspecting the inside of the cabinet, which are not described here. |
| 上一页 低压配电柜的保养 |
| 下一页 如何调试低压配电柜 |
Copyright © 技术支持：遨游网络